Technical Guides6 min read

How to Prepare Your BOM for Turnkey PCB Assembly

Engineer reviewing a Bill of Materials with PCB components on a workbench

A well-prepared Bill of Materials saves time, prevents delays and keeps costs under control. Here is what to include, what to avoid and how to format your BOM before sending it to a contract manufacturer.

Getting a turnkey PCB assembly quote starts and ends with your Bill of Materials. A clean BOM means faster pricing, fewer questions from the manufacturer and fewer surprises on your invoice. A messy one means delays, substitution risks and costly rework.

Here is what to get right before you send it.

1. Use manufacturer part numbers, not just descriptions

Every component should have at least one Manufacturer Part Number (MPN). Descriptions like "100nF capacitor 0402 25V X7R" are a useful starting point, but two components with the same description can have different footprints, temperature grades or dielectric characteristics.

Include the full MPN for every line item. If you have an approved alternative, add it in a second column labelled Alt MPN. This gives your assembler sourcing flexibility without opening the door to unapproved substitutions.

2. Include reference designators

Every component in your BOM should map directly to a reference designator on your schematic and PCB layout: C1, R3, U7 and so on. Without reference designators, the assembler cannot cross-check your BOM against your Gerbers and pick-and-place data.

Missing reference designators are one of the most common causes of assembly errors. Matching each BOM row to a specific designator takes minutes to add and saves hours of rework.

3. Specify the package or footprint

0402 and 0603 look the same on a spec sheet but they sit on completely different footprints on the board. Always include the package in your BOM: 0402, SOT-23-5, SOIC-8, QFN-32, and so on. For through-hole components, include the lead pitch.

If your CAD tool exports a Land Pattern or Footprint column, include it. The more specific you are, the fewer clarification rounds you need before assembly starts.

4. Mark DNP (Do Not Place) components clearly

If a component appears on your schematic but is not fitted in this build, mark it DNP in a dedicated column. Do not leave the MPN blank or delete the row — both create ambiguity that the assembler has to resolve before they can proceed.

A clear DNP column makes the intent unambiguous and prevents expensive rework caused by incorrectly populated or unpopulated pads.

5. Confirm quantities per board, not per order

The assembler needs the quantity per PCB, not your total order quantity. If your BOM was exported from a CAD tool, double-check that the quantity column reflects components per board.

A quantity error on a multi-up panel or a high-volume run can cause shortages mid-production and delay your entire order while additional stock is sourced.

6. Flag long-lead or sole-sourced parts early

If any component is single-sourced or has a known lead time above eight weeks, flag it in your BOM before sending it for quoting. This allows the assembler to surface availability issues and suggest alternatives at the planning stage rather than after boards have already been fabricated.

Common long-lead items include specialised ICs, certain connectors, power modules and any component that has seen supply shortages in recent years. A brief note in the BOM column saves significant time.

7. Export as .xlsx or .csv, not PDF

Contract manufacturers need to import your BOM into their MRP or sourcing system. A PDF cannot be parsed reliably and forces manual re-entry, which introduces errors. Export from your CAD tool as .xlsx or .csv and include clearly labelled column headers.

Recommended column headers: Reference, MPN, Manufacturer, Description, Package, Quantity, DNP, Alt MPN. Keep it consistent and your BOM will slot straight into any sourcing workflow without a back-and-forth.

Sending your BOM to Synatel

When you send your BOM to Synatel, we review every line before pricing. We flag availability issues, suggest alternatives where needed and confirm lead times upfront so there are no surprises after you commit to an order.

We work with ALLPCB for fabrication and source components through established UK and international distributors, so we can usually advise quickly on availability even for less-common parts.

If you would like to talk through your project before sending a BOM, book a free consultation at synatel.co.uk/book-appointment. We are happy to review a draft BOM over a call and advise on any parts that could cause issues before they become problems.

Need help with your next project?

Talk to a Synatel engineer

Whether you need a PCB quote, a full BOM sourcing review or an assembly enquiry, our engineering team is ready to help.

How to Prepare Your BOM for Turnkey PCB Assembly | Synatel